Notes on Printing and Color Matching

1. For film, be careful not to have any holes (light leakage) in the actual area. The edges and corners of each CMYK film must match perfectly, without any scratches or scratches.

2. The sample draft must be carefully proofread, the responsibility is great!

3. When signing, pay attention to the required paper, printing quality, delivery time, and subsequent process requirements, and do not be careless!

4. Follow up.

[1] Pay attention to the chromaticity of printing (whether it is solid or not, whether it is heavy or light is mainly compared to the sample draft. I often say this when following orders: red printing is heavy, green printing is less, and the ink is a bit thick...);

[2] Alignment (whether the edges and corners of CMYK are aligned, it is best to use a magnifying glass to see the error of lines 1 and 2);

[3] Pay attention to whether there are obvious dirt spots on the light colored parts of the printed material, and point them out at any time to let the printer clean the plate;

[4] Pay attention to whether there are any excess white spots or other color spots in the dark parts of the printed material, and erase them at any time;

[5] For each part of the printing, the workers will take out a few samples and you can follow along. The printing machine may run for a period of time and some color may run light or heavy. Guangzhou Printing Factory chooses Caihui, please feel free to call us at any time!